On NB3, I noticed that scaling is only affecting the x-axis (both on the scale node, and the scale portion of the copy node). Is this expected? Seen on 3.0a28
Comments are currently closed for this discussion. You can start a new one.
|?||Show this help|
|ESC||Blurs the current field|
|r||Focus the comment reply box|
|^ + ↩||Submit the comment|
You can use
Command ⌘ instead of
Control ^ on Mac
Support Staff 1 Posted by lievenmenschaer... on 22 Nov, 2012 08:18 AM
Scale expects a point as input.
You probably send a number to the scale port.
Add a point node to the network and connect your number to its x AND y port. Connect this point node to the scale port. Now you can also change the scale factor on the x-axis and y-axis separately by changing the value in the point node.
hope this works,
Frederik De Bleser closed this discussion on 22 Nov, 2012 09:03 AM.
yancy re-opened this discussion on 22 Nov, 2012 04:55 PM
2 Posted by yancy on 22 Nov, 2012 04:55 PM
Oops, I had my parameters pane too small. The second set of parameters were truncated from display.
Support Staff 3 Posted by Frederik De Ble... on 26 Nov, 2012 08:39 AM
We've fixed the "second port" problem and will release a new version with this fix soon.
Frederik De Bleser closed this discussion on 26 Nov, 2012 08:39 AM.